Professional Experience

Clifford O. Reid - Revit Architectural Consultant

2006 - Present

Teaching and providing technical support in AutoCAD, Revit Architecture, Revit Structures and Revit MEP. 
Providing Revit Modeling Services of residential, commerial, interior and retail projects to Architects, Engineers and Architectural Students.  Fee and Service Consultant based on Scope of Project.


CAD Force, Marina Del Rey, CA

Completed the Revit Model for the 10,000 SF multiplex Movie Theater Building using Revit Architecture and Revit Structures

Gregorian Residence, Glendale, CA

Completed the Revit Model for the 2500 SF Residential Project using Revit Architecture

Calabasas Residence, Calabasas, CA

Completed the Design Development and Construction Documents using Revit Architecture

Sliver Engineers and Associates, Van Nuys, CA

Completed the Revit Structural Model of a 2 story Commercial Project using Revit Structures

SLM Design Solutions, Baldwin, NY

Completed the Schematic and Program Development Documents for Abyssinian Development Corporation in New York using Revit Architecture.  I continue to work and assist SLM Design with proposal and Revit Models.

Beth Donner, Interior Designer

Carleplace REeception Hall

340 Old Country Road , New York

 One on one , Group Sessions, Office Session in New York and California Areas  

 Teach Revit Architecture, Revit Structure and Revit MEP to students from New York Institute Technology, New York Interior Design and Fashion Institute Technology, University of Southern California Architectural and Interior Design Programs.

Parsons Brinckerholl Engineers, Los Angeles, CA

CAD Manager

March 2015– August 2016

As CAD Manager I am responsible for all aspects of the design of the construction documents and completion of architecture, structural and mechanical drawings for the California METRO Projects.   

I  am responsible for ensuring that the final design product in accordance with established design standards.  As a CAD Manager I lead the team of Computer Aided Designers in the creation of construction documents. I establish the initial design parameters, and then allow the associates to complete the work under my supervision. I instruct CAD personnel in proper procedures, as well as ensure that the documents are properly completed and the standards are met. I encourage efficient, accurate work. As CAD Manager, I serve as the primary contact point between the CAD team and the in office staff of Architects, Engineers and Consultants.

A& G Engineering / HNTB Engineers, New York

Consultant Architect

November 2013 – July 2014


Produced the construction documents for substation and transit rail repair and replacement  projects under the New York City MTA, Hurricane Sandy Recovery Program. 

Created construction documents using Micro-Station, Revit Architecture and Auto Cad. 

Bronx Lebanon Hospital – Facilities Planning Department, Bronx, New York

Health-care Facilities Project Manager Consultant

May 2013 – November 2013

Representative Projects:

1650 Grand Concourse- 11th floor Endoscopy remodel


Prepared architectural plans for construction and interior remodeling bids and projects, and help oversee the implementation of these projects. 

Involved in the determining construction requirements and project specifications, providing CAD drafting services.  Solicited contract proposals, helping prepare contract documentation, and assisting with the selection of contractors. 

Supported Facilities Planning Department with the development and execution of facilities remodeling and construction, prior and during the construction phase.  Created construction documents using Revit Architecture and Auto Cad. 

Lee Harris Pomeroy Architects, New York

February 2013 - May 2013 (Contract)

Revit Architectural Consultant

Representative Projects:

PS 339- 39-07, 57 Street, Woodside, NY


Assisted in the Production of Revit Construction Documents for the New York School Construction Authority School Building.  Assisted in the coordinating Structures and MEP with the Architecture Revit Model in Navis Works for conflicts.

Produced the Revit detailing and Revit technical support, FF & FE and creating Revit families for the project.

ITT College – Computer Drafting and Design Department, Culver City, CA

March 2010 -June 2011 (Contract)



Taught drafting and construction using Revit Architecture, AutoCAD 2010 and 

Autodesk Inventor 2010.

Taught wood and metal framing for single family homes and office space planning.   

Oversaw the function of the Revit Club 

The Aerospace Corporation – Facilities Planning Department, El Segundo, CA

March 2008 - March 2009 (Contract)

Facilities Architectural Project Engineer


Produced schematic and completed the design development documents for facility buildings using Revit software.  Completed the design development drawings for the D10 Building, space planning and remodeling in Building A2 and Building A3, office and lab space planning in Building A9, and upgrading existing buildings and campus grounds for California Title 24 and ADA compliance.

Supported Facilities Department with the development and execution of facilities remodeling and construction, prior and during the construction phase.

Checked the accuracy of construction drawings in comparison to existing field conditions.

Managed, oversaw and coordinated with outside design consultants on facilities projects.

Assisted with the development of building design criteria and the day-to-day interface with customers/administrators regarding project status, project requirements, scope of work, cost estimates, project approvals, and coordination with other departments, 

Coordinated with Facilities Department staff, electrical, mechanical and CAD personnel from design inception through construction document completion.

Los Angeles Unified School District – New Construction, Los Angeles, CA

March 2007 - January 2008 (Contract)

Design Manager


Responsible for Construction Administration for Los Angeles New Construction School Project, which included the new construction, modification and ADA compliance.

Verified the accuracy of construction drawings prepared by consultants to existing field conditions. Reviewing documents comply with LAUSD construction and design standards. 

Completed the Revit Building for the new Food Service Building for MS 333. 

Westwood College – Design Department, Torrance, CA

2007 (Contract)

Part-time Instructor


Taught courses in AutoCAD, Revit Architecture and Building Construction.

Prepared course outlines and course descriptions.

Taught wood frame and interior design construction.

US CAD, Costa Mesa, CA


Application Engineer


Responsible for demonstration, implementation, consulting, training and technical support for Autodesk products, which included Revit Architecture, Revit Structural and Auto Cad.

California Lutheran University – Facilities Planning Department, Thousand Oaks, CA  

November 2004 - August 2005 (Contract)

Facilities Project Engineer

Representative Projects:

Gilbert Sports and Fitness Center

Nelson Room Remodel

Facilities Planning Office Renovation

Track and Field Facilities


Assisted the Project Manager in preparing budget estimates and constructability time schedules.

Supported Facility Director with the development and execution of facilities renovation and construction projects.

Assured the coordination between trades and project teams to keep project on schedule during design to construction. 

Oversaw the design documents and construction of Tilt-up reinforced concrete building, Gilbert Sports and Fitness Center.

Freidmutter Group, Newport Beach, CA


Job Captain

Representative Projects:

Cosmopolitan Hotel and Casino, Las Vegas, NV


Produced and completed the Revit construction documents for the new fifty story casino and residential tower.  Worked on the tower curtain wall system, residential units and casino floor plan using Revit Architecture.

HLW Architects, Santa Monica, CA

March 2003 – 2004 (Contract)

Project Manager 

Representative Projects:

Bellagio Casino and Hotel – FIX Restaurant Remodel, Las Vegas, Nevada

Amgen Technologies Sample Bank Lab - Thousand Oaks, CA


Produced and completed the construction documents for the FIX Restaurant at the Bellagio Casino and Hotel.

Produced and completed the Design Development Document for the Amgen Sample Bank Science Lab.

RBB Architects, Los Angeles, CA

2003 (Contract)

Healthcare Project Manager

Project Manager 

Representative Projects:

Mission Hospital Acute Care Tower Building


Producing and completed the construction documents for the new four-story, sixty-eight beds, Mission Hospital Acute Care Tower Building. Produced and reviewed construction documents for local codes and OSHPD requirements.

Boyle Engineering – Architectural Design Department, Newport, CA

2002 – 2003 (Contract)

Architectural Engineer

Representative Projects:

New Orange County Transit Bus Facilities

New Buena Park Metro Link Station


Produced and completed the construction documents for the Mass Transits Authority projects.


HKA Architects- Torrance, CA


Healthcare Job Captain

Representative Projects:

Torrance Memorial Medical Center, West Campus Tower


Oversaw, producing and completing the construction documents for the new five-story tower. Coordinated the documents of consultants working on the project.

BTA Architects, Westwood, CA

March 2000

Health care Project Manager

Representative Projects:

Stanford University, Center for Cancer Treatment and Prevention Ambulatory Care Pavilion


Assisted in producing and completing the construction documents for the exterior of the building.  Completed the architectural details for the masonry and glass curtain wall systems.

deJongh Partnership, St. Thomas, United States Virgin Islands

April 1999 - November 2000


Representative Projects:

Senator William Gray Residence, St. John, USVI

University of the Virgin Island’s Capital Improvement Program

University of the Virgin Island’s Sports and Fitness Center


Designed and proposed ADA upgrade of campus grounds and facilities 

at University of Virgin Islands.  

Designed and proposed designs for campus improvements.

Designed residential and commercial projects.

Completed the construction documents and details for projects.


Design Consultants - Clifford O. Reid Architect - Amityville, NY

1985 - 1999


Representative Projects:

Mellen Residence, Atlantic Beach, Long Island, NY

Bodian Residence, Old Brookville, Long Island, NY

Queen School Construction Program


Prepared and completed construction documents using AutoCad for residential track housing, high-end residential projects and commercial retail projects.  

Served as Project Architect for projects under construction.

Oversaw the Construction Documents process, for the Queen's School Construction Program.  

Completed on site evaluations and building and roof inspections. Wrote property assessment reports for work to be done and for cost estimating.


State University of New York at Farmingdale

 Engineering, Architecture and Construction Department, Farmingdale, NY

1985 – 1999 Adjunct Assistant Professor

1990 – 1997 Assistant Professor

1997 – 1999 Adjunct Assistant Professor

Courses Taught: 

AutoCAD, Building Materials and Methods of Construction, Wood Construction Detailing, Hands-on Wood Framing, Architecture Design, Architectural History, Graphics and Residential Construction Documents


Prepared course descriptions, course assignments, class examinations and lectures. 

Developed course outlines and course descriptions. 

Assisted in on Campus space planning and projects.

Participate in College Committees.

Skidmore, Owings and Merrill Architects, New York, NY

1983 - 1985

Assistant Architect

Representative Projects:

Citi Corporation Building, Queens, New York

Chase Manhattan Bank, New York


As a team member, assisted in producing and completing the details construction documents for projects.

Produced the architectural details for the curtain wall, windows and lobby features.

Make a Free Website with Yola.